Embedded Linux for a device that transports and preserves living cells, ready for series production
The device transports living cells and preserves them on the way. For Sasse Elektronik we wrote the software that runs it.
Project dataMedical cell transport system
- Client
- Sasse Elektronik
- Industry
- Medical devices
- Our scope
- The device's own Linux, the drivers for its hardware, the application logic and the graphical user interface
- Stack
- NXP i.MX 6ULL
- Embedded Linux
- Yocto Project
The challenge
A Linux system made for one device
An NXP i.MX 6ULL processor inside the case runs the device. No ready-made Linux fits it, so the system has to be put together for this device.
That meant drivers for the parts only this device has, the application logic, a user interface on its display, and a build fit for series production.
What we did
What runs when the device is switched on
A device like this starts in six stages. All but the first come from the Linux we built for it with Yocto or from our own code.
Power-on
The processor wakes up and runs a small program that its maker, NXP, put into the chip. It finds the device's storage and loads the first piece of software from it.
Our part
None. This program is fixed in the chip; our software starts at the next stage.
The result
Development was completed and the device prepared for series production.
What ready for series production means
Every unit gets the same software, made by one build that can be repeated. Nothing on a unit depends on someone having set it up by hand.

Oleksii Kvasnikov · Founder and lead engineer
A device that needs its own Linux
Tell us what it has to do and how far the software is today.