We build the test system at the end of your production line

Before a board leaves the factory, a test station checks that it was assembled correctly. We build these stations, with the fixture that holds the board, the instruments, the test software and a record of every result. For Siegenia we developed one designed for 100,000 boards a year, at most 30 seconds per board.

AT MOST 30 s PER BOARD FIXTURE holds the board on spring pins BOARD IN from the line BOARD OUT pass or fail wiring POWER SUPPLY switches it on MEASUREMENT checks voltages PROGRAMMER loads firmware DATA LINK tests functions control TEST SOFTWARE runs every step, decides pass or fail results RESULTS DATABASE one record per board LABEL PRINTER a label for each pass FACTORY SYSTEM the plant's own
From the project: an automated test system for series production, specified for at most 30 seconds per board.
Illustration: the blocks such a station usually has, not the client's own. The block with the dashed outline belongs to the factory.

Scope

What we take on

The work that takes a finished design into series production.

  • The test station

    Fixture, instruments and software in one automated station that tests every board before it leaves the line.

  • A record of every board

    One test record per board, stored under its serial number, so a fault found later can be traced back.

  • A test planned with the board

    We place the test points while the layout can still change. That keeps the test short.

  • Documents for series production

    What a manufacturer needs to build, program and test the product without asking the developers.

  • Coordination with your manufacturer

    We settle the production data and the first batch with the board manufacturer and the assembler.

Questions

Questions about production tests

When should we plan the production test?

During the board layout. The test points have to be on the board before it is made, so we write the list of tests during development.

Do you build the boards in series?

No, a board manufacturer and assembler do. We prepare the production data, answer their questions, coordinate the first batch with them and build the test station. We can work with the manufacturer you already use.

Who owns the test system and its software?

You do. The station, its software and its documents are part of the delivery.

Do you work at a fixed price?

Yes, if the station can be specified in writing. Otherwise we work by the hour.

Oleksii Kvasnikov

Oleksii Kvasnikov · Founder and lead engineer

Tell us the yearly volume and the time you have per board

Send the board or its layout too, if it exists.